| EZ WIRING HARNESS KITS UNIVERSAL KITS FIT ALL CARS & TRUCKS. 21, 12, & MINI 12 & 20 CIRCUIT HARNESSES AVAILABLE All EZ Wiring kits use GXL 125 high temp cross linked polyethylene jacketed wire that is grease, oil, gas, and acid resistant. EACH WIRE IS LABELED EVERY 5" its entire length so you know exactly where it goes and checking a circuit is EZ! Harness includes: fuses, flashers, breaker, connectors and terminals, horn relay, headlight plugs, loom and include GM factory column connectors and instrument wiring. Also includes instructions for installation in Ford or Mopar. AVAILABLE IN 4 DIFFERENT VERSIONS: The difference between the standard & mini versions is the size of the fuse panel & fuses. 12 circuit standard $204.00 21 circuit standard $230.00 12 circuit MINI $195.00 20 circuit MINI $217.00 |
BLOCK HUGGER HEADERS
Fits 1955-UP Chevy Small Block
265-283-305-307-327-350-383-400
engines w/straight plug only.
Comes with gaskets, bolts & reducers
(kit as shown in photo below).
AVAILABLE IN STAINLESS OR CERAMIC
COATED FINISH.
Fits 1955-UP Chevy Small Block
265-283-305-307-327-350-383-400
engines w/straight plug only.
Comes with gaskets, bolts & reducers
(kit as shown in photo below).
AVAILABLE IN STAINLESS OR CERAMIC
COATED FINISH.
DOLPHIN GAUGES
ALL DOLPHIN 5 & 6 GAUGE SETS INCLUDE FUEL, OIL, AND TEMPERATURE SENDING UNITS. TACH INCLUDED IN 6 GAUGE SETS.
GAUGES ARE AVAILABLE AS MECHANICAL or PROGRAMMABLE SPEEDOMETER.
5 & 6 PC FACE COLOURS AVAILABLE: WHITE, BLACK, GREY, TAN (comes in chrome bezel or gold bezel), AQUA, SHARK SERIES
FACE COLOURS AVAILABLE FOR QUAD SETS: BLACK, WHITE, TAN (comes in chrome bezel or gold bezel)
5 GAUGE MECHANICAL SET - $233.00 5 GAUGE PROGRAMMABLE SET** - $299.00
6 GAUGE MECHANICAL SET - $275.00 6 GAUGE PROGRAMMABLE SET** - $332.00
3 3/8" QUAD MECHANICAL SET - $290.00 3 3/8" QUAD PROGRAMMABLE SET** - $332.00
5" QUAD MECHANICAL SET - $300.00 5" QUAD PROGRAMMABLE SET** - $384.00
ALL PROGRAMMABLE SETS HAVE DIGITAL ODOMETER AND FEATURE ONE BUTTON CALIBRATION.
**NOTE WHEN BUYING PROGRAMMABLE SETS**
YOUR TRANSMISSION MAY REQUIRE A PULSE GENERATOR WHICH IS AVAILABLE SEPARATELY:
FORD PULSE GENERATOR: $57.00 GM/MOPAR PULSE GENERATOR: $49.00
ALL DOLPHIN 5 & 6 GAUGE SETS INCLUDE FUEL, OIL, AND TEMPERATURE SENDING UNITS. TACH INCLUDED IN 6 GAUGE SETS.
GAUGES ARE AVAILABLE AS MECHANICAL or PROGRAMMABLE SPEEDOMETER.
5 & 6 PC FACE COLOURS AVAILABLE: WHITE, BLACK, GREY, TAN (comes in chrome bezel or gold bezel), AQUA, SHARK SERIES
FACE COLOURS AVAILABLE FOR QUAD SETS: BLACK, WHITE, TAN (comes in chrome bezel or gold bezel)
5 GAUGE MECHANICAL SET - $233.00 5 GAUGE PROGRAMMABLE SET** - $299.00
6 GAUGE MECHANICAL SET - $275.00 6 GAUGE PROGRAMMABLE SET** - $332.00
3 3/8" QUAD MECHANICAL SET - $290.00 3 3/8" QUAD PROGRAMMABLE SET** - $332.00
5" QUAD MECHANICAL SET - $300.00 5" QUAD PROGRAMMABLE SET** - $384.00
ALL PROGRAMMABLE SETS HAVE DIGITAL ODOMETER AND FEATURE ONE BUTTON CALIBRATION.
**NOTE WHEN BUYING PROGRAMMABLE SETS**
YOUR TRANSMISSION MAY REQUIRE A PULSE GENERATOR WHICH IS AVAILABLE SEPARATELY:
FORD PULSE GENERATOR: $57.00 GM/MOPAR PULSE GENERATOR: $49.00
5" QUAD SET 3 3/8" QUAD SET SHARK SERIES
TAN WHITE
AQUA BLACK
TAN GREY
w/gold
AQUA BLACK
TAN GREY
w/gold
HEADERS
| SPECIALS/CLEARANCE: LIMITED QUANTITIES IN STOCK |
POWER WINDOW KIT $225.65 Flat Glass Kit. Motor on the Bottom kit includes: 2 Regulators, 2 Fixed Channels, 3 Unlighted Switches, Wiring Harness and Motor Wires. Made in USA w/Lifetime Warranty. Works w/ both Wide & Narrow Doors FITS: Automobiles from the 1920's to the 1960's. |
Watson's Streetworks Sequential LED $650.00/set of 3 lights
Taillights & 3rd Brake Light
A real attention getter! Each taillight is split into three groups of 20 LED's that
sequence from inside-out with the turn signals. Brake lights quickly sequence
once then all stay on. All the necessary convertors and sequencing modules
are included along with great instructions. Includes dummy loads for flasher
operations.
The Sequencing LED 3rd Brake Light is split 10-10-20-10-10 and sequences
from inside-out once when the brakes are first applied then stays on solid. 1/2"
wide X 15-1/4" long.
The billet aluminum frames work with the light kits to allow you to surface mount
the lens on the outside of the sheet metal while the LED's and housing attach to
the inside. The Frames are 16-3/4" long X just under 1" wide and will protrude
.400" off the surface.
Taillights & 3rd Brake Light
A real attention getter! Each taillight is split into three groups of 20 LED's that
sequence from inside-out with the turn signals. Brake lights quickly sequence
once then all stay on. All the necessary convertors and sequencing modules
are included along with great instructions. Includes dummy loads for flasher
operations.
The Sequencing LED 3rd Brake Light is split 10-10-20-10-10 and sequences
from inside-out once when the brakes are first applied then stays on solid. 1/2"
wide X 15-1/4" long.
The billet aluminum frames work with the light kits to allow you to surface mount
the lens on the outside of the sheet metal while the LED's and housing attach to
the inside. The Frames are 16-3/4" long X just under 1" wide and will protrude
.400" off the surface.
3RD BRAKE LIGHT SHOWN WITH BILLET FRAME
TAILLIGHT SET BEFORE
FRAME INSTALLATION
FRAME INSTALLATION
UNIVERSAL DASH INSERTS $133.00
BILLET ALUMINUM HOT ROD DASH INSERT FOR 3 3/8
INCH GAUGE SET. THE PANEL DIMENSIONS ARE 15 1/2
X 4 3/8. INCLUDES LED BULBS FOR INDICATOR LIGHTS.
BILLET ALUMINUM HOT ROD DASH INSERT FOR 3 3/8
INCH GAUGE SET. THE PANEL DIMENSIONS ARE 15 1/2
X 4 3/8. INCLUDES LED BULBS FOR INDICATOR LIGHTS.
12 CIRCUIT
STANDARD
HARNESS
STANDARD
HARNESS
21 CIRCUIT
STANDARD
HARNESS
STANDARD
HARNESS
12 CIRCUIT
MINI HARNESS
MINI HARNESS
RAW STEEL (PAINTABLE) - $132.00
CERAMIC COATED HUGGER HEADERS - $230.00
STAINLESS HUGGER HEADERS - $250.00
CERAMIC COATED HUGGER HEADERS - $230.00
STAINLESS HUGGER HEADERS - $250.00
| **ALL PRICES ARE BEFORE TAXES & SUBJECT TO GST (ALL CANADIAN RESIDENTS) & PST (ONTARIO RESIDENTS)** FREE PICK UP OR DELIVERY IN GUELPH, CONTACT US FOR SHIPPING ESTIMATE TO OTHER LOCATIONS CALL OR EMAIL US redmilerods@yahoo.ca WITH YOUR REQUESTS PAYMENT METHODS ACCEPTED INCLUDE: CASH, VISA, MASTERCARD, PAYPAL |
 |  |  |
| Power Window Express Module - $29.95 Can convert existing power windows to one touch up or down. |
| ***PLEASE NOTE: THESE PRICES ARE IN CANADIAN DOLLARS, FOB GUELPH, ON. SINCE THE U.S. DOLLAR, COSTS & BUYING CONDITIONS ARE CONTINUALLY CHANGING, PRICES ON OUT OF STOCK ITEMS ARE SUBJECT TO CHANGE UPON RE-STOCKING.*** |
| redmilerods@yahoo.ca PH: 519-822-8896 |
POWER WINDOW KIT $199.95
Easy to install power window kits feature
OEM quality motors and screw cable drive,
wide channels for smooth movement,
window channels that self center on nylon
guides, clips to secure glass to channel
without tape or glue. Power window kit will
work for all windows with flat
glass only that go straight up
and down and that are between
6" and 24". Kits include 2 power
window assemblies, crossover
wiring and lighted switches.
Easy to install power window kits feature
OEM quality motors and screw cable drive,
wide channels for smooth movement,
window channels that self center on nylon
guides, clips to secure glass to channel
without tape or glue. Power window kit will
work for all windows with flat
glass only that go straight up
and down and that are between
6" and 24". Kits include 2 power
window assemblies, crossover
wiring and lighted switches.
